How To Use Monitor Speakers: A Quick Tech Setup Guide

Do you love to play music while working on your personal computer? Desktop computers normally come with built-in speakers rather than standalone speakers. But if you want something improved and somewhat kind of an upgrade, then perhaps you should know how to use monitor speakers and how to install it.
Working on a computer would be so boring if you're not listening to music. Using monitor speakers is the same as using standalone speakers; so, if you know how to use monitor speakers, then you've come into the right place. In this article, I will teach you some effective ways to use it properly. This will help you do it the right way and to prevent it from getting damaged.
Ways to Use Monitor Speakers
There are three methods on how to play sound through your monitor. If you own a monitor that comes with built-in speakers, you need to know the ports to configure.
HDMI
HDMI is one of the most common ports that people use. Its interface is replacing analog video standards by conveying the audio data and videos that are not compressed from the device compliant with HDMI to the monitor. The HDMI will not lose the video and the audio, and there will be no need for conversion.
When connecting the monitor through the HDMI, you must make sure that you use the HDMI cable connected well on both ends to have and preserve its very good quality. Here are the ways on how to use monitor speakers through HDMI.
Step 1
Before you start, check the sound card configuration and connect the cable of HDMI to both ends.
Step 2
Click on the volume icon on the taskbar, and you will see a pop-up menu. Choose the playback device to open the sound properties.
Step 3
After sound properties were shown, you will see the monitor or TV that appears first, while some devices include only the speakers connected to the computer. Enable the HDMI audio by clicking the monitor and click the "set-as" default from the menu list that prompts.
Step 4:
You can now test if it's already working by selecting the Configure button. If it works, click the okay button to make the task complete. Then you can reboot the computer if it's prompted.
Display Ports
The Displayport is known to have an interface that includes both video and audio signals. They also carry a USB and some other forms of data. The Display ports are designed to remove the limitations of the VGA, DVI, and FDP-Link. Also, it requires three components to let the audio transmission working; the video output device, sink to the device, and the dual-cable adaptor.
You should know that the video output needs to transmit the audio and video signal. To make it work, make sure that the video card and driver are installed well. Here are the steps on how to use monitor speakers through display ports.
Step 1
First, you have to connect the DisplayPort cable between the audio and the monitor source.
Step 2
Proceed to the control panel and select the Sound button. Then change the playback device to Display Audio right away.
Step 3
See to it that the sound is not muted or not too low before you test it. Once it's fine, test the DisplayPort by clicking the configure and the Test.
Step 4:
If prompted to do so, then reboot your computer. Otherwise, click the okay button to complete.
Audio Line In
Unlike the HDMI and DisplayPort that is straightforward, the Audio Line In carries video signals. They don't carry audios. But if you have older PC versions, then you would have DVI or VGA ports. It would also be an advantage if you already know how to use monitor speakers to use an older version.
The Audio Line In will need a headphone jack on your Audio In-Port and PC. However, if you did not get a 3.5 mm cable on both ends with the monitor, you will need to get another one. You have to connect it with your monitor and PC with a cable to transmit the audio.
Conclusion
Knowing how to use monitor speakers will prevent you from damaging your PC and any risks of troubleshooting. You may also adjust the volume to your desired music, and you can also learn how to use control panels to test if the speakers are working well. If the sound it produces is not good enough, then you can also attend to that issue right away, as long as you know how to use it.
I hope the three ways mentioned have helped you in using monitor speakers in the right way. It's always a good thing that you know the ways, so if issues happen, you can attend to it as soon as you can.