These days, most TVs don’t come with RCA outputs because HDMI sockets can produce outgoing and incoming sounds. HDMI panel and wiring can handle the digital audio and video of your TV. So you may not like that connection type if your stereo or receiver has analog inputs. What do you do now? How to connect TV to speakers without an analog receiver? Do you need to purchase a new receiver or speaker system? That might sound like overspending. This article will tell you how to connect modern TVs to your RCA-compatible speaker system to help you with your sound-craving issue.
How To Connect TV To Speakers
Turn your TV off and unplug it. Before you connect any speakers or sound system to your TV, it’s necessary to do this. Find the audio output sockets for your television. On the back and side of the TV, search for at least the following ones.
- RCA – it is a red and white circular port. RCA is also referred to as an ‘analog’ port.
- Optical – It is a square port but sometimes hexagonal. Optical media is called ‘digital.’
- Headphone – these channels are 3.5 mm jack used by most headsets. You’ll see this port mostly in headphones.
- HDMI – It is commonly used for connecting video and audio output via HDM. Some stereo speakers also connect with HDMI.
Here’s how to connect a TV to speakers.
It will also allow you to fully understand how far you have to extend your wires, enabling you to position the speakers. Connect the receiver to your speakers. To get your speakers connected to the receiver:
- On the rear of the left speaker, attach the white RCA wire to the white port. Insert it into the white port on the back of the receiver.
- Attach the red RCA cable to the red port on the back of the right speaker. Clip it into the red port on the speaker’s back, either below or next to the white port.
Plug your speakers into a power source. You’d need to supply the necessary cable, provided with the speaker to the rear, side, or front of the system. You can also install a soundbar or subwoofer.
Link your TV with your stereo receiver. Connect one end of the digital or HDMI wire of the device into the suitably labeled port on the transmitter’s rear. Pair the other end of the wire into your TV’s digital or HDMI channel.
- You can likely wind up using RCA cables to connect it to the TV rather than your speaker is old enough.
- Hook it into your TV before adding the other ends of the cords here if you are using an attachment like a headphone jack.
Connect in a power supply with your stereo receiver. It could be a socket on the wall or a surge protector. Ensure that both the electrical outlet and the amplifier are securely connected to the power cable.
Connect your TV back in and switch it on. Your sound system is all set up properly now.
- To use the speakers, you can have to adjust your TV’s audio quality. This is achieved by selecting the Menu button on your TV or remote, moving to the ‘Audio’ portion. You can also adjust the TV speaker’s preset content to your current output HDMI.
Connecting Speakers to a TV using 3.5mm Headphone Jacks
Using laptop speakers is another quick and easy way how to connect a TV to speakers through RCA outputs. These days, all the new TV sets with 3.5mm audio connectors that you can utilize for your television’s sound accessories.
You might want to use computer sound systems in support of the speakers in your home. You may think computer speakers don’t sound incredible, so you may be a little worried about using them. But the fact is that these days there are plenty of computer speakers that sounds pretty incredible. You can also get sub-woofers to add a little more ‘oomph’ to your audio.
Other Things You Can Do To Produce Sound With Speakers
If no sound is detected, verify that the A/B speaker switch is working first. No sound is permitted through the audio system if the device is disabled. The TV’s settings are another place that you can search if you hear no sound after wiring the speakers to the TV. If you have this feature on your TV, you can need to switch the internal audio off and switch the TV’s sound signal on.
Your sound equipment also may have a pause or mute function that will prevent audio from transmitting to the speakers via the TV. If your TV volume is lowered or off and the sound system’s level is muted, it may be damaged.
Do not panic if you find later that there are no RCA outputs for your home’s surround audio system on your new tv. You need a bit of imagination and the necessary pieces of equipment to bind your TV to your current audio system. You also discovered how to connect a TV to speakers. With the above suggestions, you don’t have to settle for TV’s speakers’ shabby sounds. Learn more about how to connect a TV to speakers and tips here.