How To Connect Extra Speakers To Stereo For Full-Blast Sounds

The best way to enjoy music is to have reliable speakers that can multiply the overall audio output. For some, having extra speakers to connect to your stereo can outright provide you with the best sound quality. So, if you have extra speakers lying around and want to know how to connect extra speakers to stereo, then you have come to the right spot.
In this article, I will teach you the basics of how to connect extra speakers to the stereo with these simple steps. At the end of reading this, you will have the full confidence to wire and connect everything up without any problems. So, if you want to learn about this set-up, read on.
Everything You Need to Know About Connecting Speakers to Stereo
Speaker Terminals
Almost all stereos, receivers, and amplifiers use speaker terminals. These speaker terminals are usually placed on the receiver's back, locking the wires through a speaker clip or binding type of mechanism. Usually, you insert the open wire inside and let the latch locked onto the wire, and it's good to go.
And to make things easier, these terminals are usually color-coded for convenience and easy to follow instruction. In case you wonder, these are the red and black combination wires. The red wire is usually the positive terminal, whereas the black is always the negative terminal.
Speaker Wires
If you talk about speaker wires, they come in color-coded red and black combinations. And they are the positive and negative terminal connections. Although everything is pretty straightforward because, as mentioned earlier, the ports and latch at the back are coded as well. This means the red wires go to the red port, and the black wires go to the black port. It's that easy.
However simple they can be, there's that always possibility where you can mix and match if you don't have a keen eye. That's why you should keep a closer look when putting speakers to their respective ports. If you accidentally mixed and matched it, then the signals transmitted might seriously affect the entire system and its performance.
While the speaker terminals are easily identified because of the color schemes, some speaker wires aren't color-coded, creating confusion among users and speaker owners.
But there's always a way to go around this problem. If a speaker wire doesn't come with a color-coded scheme, the best way to know which one is positive and negative is to look closely at the wires. If you see a dotted or dashed line on one side of the speaker wires, this means it is positive. In almost all cases, most positive wires are identified if they have these lines or other markings.
Connecting Amplifiers or Receivers
As mentioned earlier, to have a well-functioning speaker to receiver relationship, the wires should be connected correctly. And this means the red wires go through the red terminals, and the black wires go through the black terminals. Technically, the labeling or the wires' color combinations doesn't matter as long as they are with their respective terminals. It is in the best interest to follow the color combination to avoid dealing with problems later on.
Steps on How to Connect Extra Speakers to Stereo
These are some of the most basic steps on how to connect multiple speakers to a home stereo:
Step 1
Prepare your extra speakers and ensure that your stereo has extra speaker terminals for your added speakers to plug into. Ensure you have an excellent area to work with and an efficient place for your extra speakers to utilize its audio quality further.
Step 2
The next step is connecting your TV output to the Stereo input if you want to watch movies that can mimic the theater's sound quality. To do this is relatively easy, plug the red cables into the red holes and the white cables into the white holes. You will only need RCA cables to be connected from your TV to the stereo in this step.
Step 3
Get your extra speakers and run the wires to the receiver. In this case, look for the speaker terminals that are usually in red and white color combinations. Some stereos may have speaker terminals where you push down a certain latch, place your speakers in and release the latch. And there is also some stereo whose speaker terminals have screw caps that you need to unscrew and wrap the wires and seal it by screwing the cap again. Connect your speaker wires to their respective terminals.
Step 4
At this point, you have probably connected all the speakers' wires to their respective terminals. The next step is turning on the speakers and TV and check whether all of the speakers are functioning correctly. If it's working correctly, then you are done. Enjoy!
Learning how to connect extra speakers to stereo is an excellent way to amplify sound further. And in this way, you get to have an immersive experience watching your favorite action movies or listening to your favorite songs.
Conclusion
You should make full use of your extra speakers lying around. That is why it's best to know how to connect extra speakers to stereo to give you that added sound boost for your day-to-day music or movie marathon needs.
Learning how to connect extra speakers to stereo is pretty quick and easy as long as you follow all the steps above. When dealing with electrical wirings, be sure to turn off your stereo, speakers, and other receivers to avoid potential electrocution.
Related Articles
Large speakers may have the meatiest and crispiest sound, but not everybody has the budget, space, or even the desire to have a set of floor standers. Rather, investing in a small set of speakers might offer you a pretty amazing or even outstanding listening experience.